JCB Site dumpers

Automatic transmission fluid capacity & service interval

JCB Site dumpers use automatic transmission fluid with a capacity of 13 liters. Service intervals include a check at 50 hours and a change at 1000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 10T-FT, Deutz TCD 3.6 L4 Stage IIIB / T4i
  • Powershift
  • Use: Normal
  • Capacity 13 liter
  • Check 50 hours
  • Change 1000 hours
  • Code: 4/4
  • 9T-FT, Deutz TCD 3.6 L4 Stage IIIB / T4i
  • Powershift
  • Use: Normal
  • Capacity 13 liter
  • Check 50 hours
  • Change 1000 hours
  • Code: 4/4

Additional Notes

  • The JCB Site dumpers 10T-FT and 9T-FT, both equipped with the Deutz TCD 3.6 L4 Stage IIIB / T4i engine, share an identical powershift transmission fluid capacity of 13 liters.
  • A 13-liter capacity in a powershift transmission reflects a relatively substantial fluid volume, consistent with the hydraulic clutch packs and torque converter circuits that powershift systems rely on for gear engagement.
  • The fluid check interval for both configurations is set at 50 hours under normal use conditions, indicating a relatively frequent monitoring schedule early in the service cycle.
  • The fluid change interval for both the 10T-FT and 9T-FT powershift transmissions is 1000 hours under normal use conditions, representing a long-duration service cycle suited to continuous site operation.
  • The gap between the 50-hour check interval and the 1000-hour change interval means the fluid level and condition are monitored across roughly 19 intermediate check points before a full drain and refill is due.

Other Systems