Ingersoll Rand Compactors, SD series
Coolant capacity & service interval
Ingersoll Rand Compactors, SD series use coolant with a capacity range of 14,2 to 16,5 liters. Service intervals require changes every 1000 hours or 12 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| SD-100TF |
|
| SD-105DX |
|
| SD-105TF |
|
| SD-122D |
|
| SD-122DX |
|
| SD-122F |
|
Additional Notes
- The Ingersoll Rand SD-100TF, SD-105DX, and SD-105TF share an identical cooling system capacity of 16.5 liters, indicating a common engine cooling architecture across those three models.
- The SD-122D, SD-122DX, and SD-122F each carry a cooling system capacity of 14.2 liters, a notably smaller volume than the 16.5-liter figure seen in the SD-100TF, SD-105DX, and SD-105TF.
- Cooling system capacity figures represent the total fluid volume held within the engine block, cylinder head passages, radiator, and associated hoses, so a 16.5-liter rating reflects a larger or more complex cooling circuit than a 14.2-liter one.
- All six models share a uniform coolant change interval of 1,000 operating hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format means the calendar limit applies even when the hour threshold has not been reached.
- A 1,000-hour service interval for coolant is a moderate cycle in heavy equipment terms, balancing additive depletion rates and corrosion inhibitor effectiveness against extended drain intervals common in some industrial applications.
- The normal use condition tied to the 1,000-hour/12-month interval applies uniformly across both the 16.5-liter and 14.2-liter capacity groups, meaning operating environment severity is not differentiated within these specifications.