Huddig Utility backhoe loaders

Coolant capacity & service interval

Huddig Utility backhoe loaders use coolant with a capacity range of 15 to 20 liters. Service intervals include checks at 10 hours and 500 hours. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
1060, 2137 -> (2008- )
  • Use: Normal
  • Capacity 15 liter
1260B, 4511 -> (2008- )
  • Use: Normal
  • Capacity 20 liter
  • Check 500 hours
1260, 4282 -> (2007- )
  • Use: Normal
  • Capacity 20 liter
  • Check 500 hours
960, 3451 - 3504 (1997- )
  • Use: Normal
  • Capacity 15 liter
  • Check 10 hours
760, 1618 - 1623 (1996- )
  • Use: Normal
  • Capacity 17 liter
  • Check 10 hours

Additional Notes

  • The Huddig 1260 and 1260B utility backhoe loaders share a 20-liter cooling system capacity, which is the largest across all listed configurations. By comparison, the 1060 and 960 models both carry 15 liters, while the 760 sits between the two groups at 17 liters.
  • The 760 (serial range 1618-1623, from 1996) and the 960 (serial range 3451-3504, from 1997) both specify a coolant check interval of 10 hours under normal use conditions. A 10-hour check interval is notably short and reflects the high-stress operating environment typical of utility backhoe loaders, where coolant condition and level can change rapidly.
  • The 1260 (from 2007, serial 4282) and the 1260B (from 2008, serial 4511) both specify a coolant check interval of 500 hours under normal use conditions. The 500-hour interval is substantially longer than the 10-hour intervals on the 760 and 960, indicating a different maintenance schedule tied to the later-generation engine and cooling system design in those configurations.
  • The 1060 (serial 2137, from 2008) carries no check interval in the listed specifications, only a 15-liter capacity figure for the cooling system under normal use conditions.
  • Serial number ranges serve as a precise identification method across Huddig configurations, since multiple models can share the same nominal designation across different production periods. The 1260 and 1260B, for example, are distinguished not only by name but by their respective serial starting points of 4282 and 4511.
  • The 17-liter capacity of the 760 is unique among the listed configurations. Neither the smaller 15-liter group nor the larger 20-liter group shares that value, placing the 760 in a distinct capacity bracket within the Huddig utility backhoe loader cooling system specifications.

Other Systems