Holder Sweepers

Automatic transmission fluid capacity & service interval

Holder Sweepers automatic transmission fluid capacity is 19 liters. Service intervals include checking every 10 hours, changing every 50 hours, and changing every 500 hours or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • V 130, 101000101-> (2010- )
  • Hydrostatic/hydraulic system
  • Use: Normal
  • Capacity 19 liter
  • Check 10 hours
  • Change 500 hours/ 24 months
  • V 130, 101000101-> (2010- )
  • Hydrostatic/hydraulic system
  • Use: First change only
  • Capacity 19 liter
  • Change 50 hours

Additional Notes

  • The Holder Sweepers V 130 (serial number 101000101 onward, from 2010) carries a 19-liter capacity for the transmission and hydrostatic/hydraulic system, a figure that applies to both the normal service fill and the first-change interval.
  • Under normal use conditions, the fluid level in the transmission and hydrostatic/hydraulic system is checked every 10 hours of operation, reflecting the demands of a hydraulically driven machine where fluid condition directly affects drivetrain function.
  • The normal-use change interval is set at 500 hours or 24 months, whichever comes first, meaning time elapsed and operational hours are both tracked as independent triggers for a fluid change.
  • A first-change-only interval of 50 hours is specified separately from the normal schedule, requiring an early drain and refill of the full 19-liter capacity well before the standard 500-hour cycle begins.
  • The 50-hour first-change interval is a one-time event tied to initial break-in, during which metal particles and manufacturing residues from new components are flushed out of the combined transmission and hydraulic circuit.

Other Systems