Hidromek Backhoe loaders

Differential fluid capacity & service interval

Hidromek Backhoe loaders use differential fluid with capacities ranging from 9 to 17 liters. Service intervals include checks every 250 hours and changes every 1000 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • HMK 102B, John Deere 4045HF485 Tier 3
  • Front
  • Use: Normal
  • Capacity 17 liter (including hub reductions)
  • Check 250 hours
  • Change 1000 hours
  • Code: ZF
  • HMK 102B, John Deere 4045HF485 Tier 3
  • Rear
  • Use: Normal
  • Capacity 9 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: ZF
  • HMK 102S, Perkins 1104D-44TA Tier 3
  • Front
  • Use: Normal
  • Capacity 14 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: ZF
  • HMK 102S, Perkins 1104D-44TA Tier 3
  • Rear
  • Use: Normal
  • Capacity 16 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: ZF

Additional Notes

  • The Hidromek Backhoe Loaders HMK 102B front differential holds 17 liters, a figure that includes the hub reductions, meaning the stated capacity accounts for fluid distributed across the axle housing and both wheel-end planetary assemblies combined.
  • The HMK 102B rear differential carries a notably smaller 9-liter capacity compared to the front, reflecting the absence of integrated hub reduction volumes in that measurement.
  • On the HMK 102S with the Perkins 1104D-44TA Tier 3 engine, the rear differential capacity of 16 liters exceeds the front differential capacity of 14 liters, a reversal of the front-heavy distribution seen on the HMK 102B.
  • All four differential positions across both configurations share a check interval of 250 hours under normal use conditions, indicating a consistent fluid level monitoring schedule regardless of axle position or engine variant.
  • The change interval for all listed differentials is 1000 hours under normal use conditions, meaning fluid replacement is scheduled at four times the frequency of the routine level check.
  • Both the HMK 102B and HMK 102S apply the same 250-hour check and 1000-hour change intervals to their respective front and rear differentials, despite differences in engine supplier and axle capacities between the two models.

Other Systems