Giant Articulated loaders
Transfer case fluid capacity & service interval
Giant Articulated loaders require transfer case fluid with a capacity of 1,5 liters. Service intervals include checks at 500 hours and changes at 100, 1000 hours, or 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| V501, Deutz D2.9 L04 (2015- ) |
|
| V501, Deutz D2.9 L04 (2015- ) |
|
| V761T, Deutz TD2.9 L04 Stage IIIb / Tier 4f (2015- ) |
|
| V761T, Deutz TD2.9 L04 Stage IIIb / Tier 4f (2015- ) |
|
Additional Notes
- The Giant Articulated loaders transfer case (transferbox) fluid capacity is 1.5 liters across both the V501 with Deutz D2.9 L04 and the V761T with Deutz TD2.9 L04 Stage IIIb / Tier 4f configurations, each starting from 2015.
- Under normal use conditions, the transferbox fluid level on the V501 is subject to a check interval of every 500 hours, with a full fluid change required at 1,000 hours or 12 months, whichever comes first.
- The 12-month time-based change interval runs alongside the 1,000-hour threshold for normal use, meaning calendar time alone can trigger a fluid change even when the hour count has not been reached.
- An initial service change interval of 100 hours applies to the V501 transferbox, separate from the normal 1,000-hour change cycle, reflecting the break-in period during which new fluid is more susceptible to contamination from component wear-in.
- The V761T with the turbocharged Deutz TD2.9 L04 engine shares the identical 1.5-liter transferbox capacity and the same 500-hour check and 1,000-hour/12-month change schedule as the naturally aspirated V501, despite the difference in engine specification.
- The initial service change at 100 hours also applies to the V761T transferbox, consistent with the V501, indicating the same early-interval fluid replacement practice regardless of engine variant.