Eurotrac Articulated loaders

Coolant capacity & service interval

Eurotrac articulated loaders utilize coolant with a capacity range of 11 to 15 liters. Service intervals include checking every 8 hours and changing every 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
W10, Kubota D902-E3B
  • Use: Normal
  • Capacity 11 liter
  • Check 8 hours
  • Change 24 months
W11 K26, Kubota D1105-E3B
  • Use: Normal
  • Capacity 11 liter
  • Check 8 hours
  • Change 24 months
W11 K33, Kubota D1105-T-E3B
  • Use: Normal
  • Capacity 11 liter
  • Check 8 hours
  • Change 24 months
W12 K36, Kubota V1505-E3B
  • Use: Normal
  • Capacity 13 liter
  • Check 8 hours
  • Change 24 months
W13 K50, Kubota V2403-M-E3B
  • Use: Normal
  • Capacity 15 liter

Additional Notes

  • The W10 (Kubota D902-E3B), W11 K26 (Kubota D1105-E3B), and W11 K33 (Kubota D1105-T-E3B) all share an 11-liter cooling system capacity, indicating a consistent coolant volume across the smaller three-cylinder engine configurations in the Eurotrac Articulated loaders range.
  • Moving to the four-cylinder W12 K36 with the Kubota V1505-E3B engine, the cooling system capacity rises to 13 liters, reflecting the larger displacement and additional cylinder count relative to the three-cylinder models.
  • The W13 K50 with the Kubota V2403-M-E3B carries the largest cooling system capacity in the lineup at 15 liters, consistent with the greater thermal load generated by a turbocharged four-cylinder engine of higher displacement.
  • A 24-month coolant change interval applies under normal use conditions to the W10, W11 K26, W11 K33, and W12 K36 configurations, meaning the fluid replacement schedule is tied to elapsed time rather than operating hours for those models.
  • A coolant level check interval of 8 hours is specified under normal use for the W10, W11 K26, W11 K33, and W12 K36, which is a very frequent inspection cadence aligned with daily or near-daily machine operation in loader applications.
  • The W13 K50 row lists only a capacity value of 15 liters, with no check interval or change interval recorded in the specifications for that configuration.