Claas Telescopic handlers

Automatic transmission fluid capacity & service interval

Claas telescopic handlers require automatic transmission fluid with a capacity of 4 liters. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Scorpion 6030, Deutz TCD 3.6 L4 (2014-2018)
  • Hydrostatic
  • Use: Normal
  • Capacity 4 liter
  • Code: Varipower
  • Scorpion 7030, Deutz TCD 3.6 L4 (2014-2018)
  • Hydrostatic
  • Use: Normal
  • Capacity 4 liter
  • Code: Varipower
  • Scorpion 7035, Deutz TCD 3.6 L4 (2014-2018)
  • Hydrostatic
  • Use: Normal
  • Capacity 4 liter
  • Code: Varipower
  • Scorpion 7044, Deutz TCD 3.6 L4 (2014-2018)
  • Hydrostatic
  • Use: Normal
  • Capacity 4 liter
  • Code: Varipower
  • Scorpion 7055, Deutz TCD 4.1 L4 (2014-2018)
  • Hydrostatic
  • Use: Normal
  • Capacity 4 liter
  • Code: Varipower Plus
  • Scorpion 9055, Deutz TCD 4.1 L4 (2014-2018)
  • Hydrostatic
  • Use: Normal
  • Capacity 4 liter
  • Code: Varipower Plus

Additional Notes

  • All six Claas Scorpion telescopic handler configurations covered in these specifications share an identical hydrostatic transmission fluid capacity of 4 liters, applying uniformly across both the Deutz TCD 3.6 L4 and Deutz TCD 4.1 L4 engine variants for the 2014-2018 model years.
  • The 4-liter figure represents a service fill capacity, which is the volume required when draining and refilling the transmission during routine maintenance, rather than a dry-fill or overhaul capacity that would account for fluid retained in internal passages and components.
  • A hydrostatic transmission uses pressurized hydraulic fluid to transfer power rather than mechanical gears, meaning the automatic transmission fluid in these Scorpion models serves both a lubrication and a power-transfer function within the drivetrain.
  • The Scorpion 6030, 7030, 7035, and 7044 all use the Deutz TCD 3.6 L4 engine, and each carries the same 4-liter hydrostatic transmission capacity, indicating the transmission unit is consistent across those four models despite differences in their load and reach ratings.
  • The Scorpion 7055 and 9055 are fitted with the larger Deutz TCD 4.1 L4 engine, yet the hydrostatic transmission capacity remains at 4 liters, the same value specified for the smaller-engined variants.
  • All rows are designated for normal use conditions, meaning the capacities listed apply to standard operating environments rather than severe-duty cycles such as extreme temperatures, heavy continuous loading, or high-dust agricultural conditions.

Other Systems