Caterpillar Soil stabilizers

Coolant capacity & service interval

Caterpillar soil stabilizers require 60 liters of coolant. Service intervals include checks at 10 hours and changes at 2000 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
SS-250, 6DD
  • Use: Normal
  • Capacity 60 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • The SS-250 with the 6DD engine has a cooling system capacity of 60 liters, which represents the total system volume including the engine block, radiator, and associated plumbing rather than a partial service fill.
  • Under normal use conditions, the coolant level on the SS-250 6DD is checked at every 10-hour interval, reflecting the short inspection cycle typical of heavy earthmoving equipment operating in demanding environments.
  • The coolant change interval for the Caterpillar SS-250 6DD is set at 2,000 hours under normal use conditions, a figure consistent with extended-life coolant formulations used in large-displacement industrial engines.

Other Systems