Bomag Reversible vibratory plates, BPR

Power steering fluid capacity & service interval

Bomag Reversible vibratory plates, BPR models use power steering fluid with a capacity of 1,2 liters. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
BPR-30/38D-3, Hatz 1B20 (S/N 101 680 26 ...)
  • Use: Normal
  • Capacity 1,2 liter
BPR-35/38D-3, Hatz 1B20 (S/N 101 680 27 ...)
  • Use: Normal
  • Capacity 1,2 liter
BPR-40/45D-3, Hatz 1B30 (S/N 101 680 28 ...)
  • Use: Normal
  • Capacity 1,2 liter
BPR-45/45D-3, Hatz 1B30 (S/N 101 680 69 ...)
  • Use: Normal
  • Capacity 1,2 liter

Additional Notes

  • The Bomag Reversible Vibratory Plates BPR power steering fluid capacity is listed at 1.2 liters across all four configurations covered in the specifications.
  • Each configuration specifies a hydraulic steering system, meaning the 1.2-liter figure applies to a hydraulic circuit rather than a conventional rack-and-pinion or recirculating-ball steering arrangement.
  • The BPR-30/38D-3 with Hatz 1B20 engine, identified by serial number prefix 101 680 26, carries the same 1.2-liter hydraulic steering capacity as the larger-displacement BPR-40/45D-3 and BPR-45/45D-3 variants powered by the Hatz 1B30.
  • The BPR-35/38D-3 and BPR-30/38D-3 share the Hatz 1B20 engine and are distinguished from each other solely by their serial number prefixes, 101 680 27 and 101 680 26 respectively, yet both carry the identical 1.2-liter steering system capacity.
  • All four configurations are rated under normal use conditions, meaning the 1.2-liter capacity figure is not associated with a severe-duty or first-change-only service scenario.