Atlas GmbH Material handlers

Coolant capacity & service interval

Atlas GmbH Material handlers utilize coolant with a capacity range of 38 to 53 liters. Service intervals include checking at 100 hours and changing at 2000 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
180MH (2010- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours
200MH (2010- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours
230MH (2010- )
  • Use: Normal
  • Capacity 38 liter
  • Check 100 hours
  • Change 2000 hours
270MH (2010- )
  • Use: Normal
  • Capacity 42 liter
  • Check 100 hours
  • Change 2000 hours
350MH (2010- )
  • Use: Normal
  • Capacity 48 liter
  • Check 100 hours
  • Change 2000 hours
520MH (2010- )
  • Use: Normal
  • Capacity 53 liter
  • Check 100 hours
  • Change 2000 hours

Additional Notes

  • The Atlas GmbH material handler lineup covered by these specifications includes six models: the 180MH, 200MH, 230MH, 270MH, 350MH, and 520MH, all with a starting year of 2010.
  • The 180MH, 200MH, and 230MH share an identical cooling system capacity of 38 liters, indicating a common engine cooling architecture across the three smaller models in the range.
  • Cooling system capacity increases progressively with model size. The 270MH holds 42 liters, the 350MH holds 48 liters, and the 520MH holds 53 liters, reflecting the larger engine displacements and greater thermal loads associated with heavier material handling machines.
  • A coolant check interval of 100 hours applies uniformly across all six models under normal use conditions. In heavy equipment, a 100-hour check interval is a standard preventive measure to catch early signs of coolant loss, contamination, or concentration drift before they affect engine temperature regulation.
  • The coolant change interval is set at 2000 hours for all six models under normal use conditions. At typical machine utilization rates in industrial or port environments, 2000 operating hours can represent roughly one to two years of service, making the change interval a significant scheduled maintenance event.
  • The uniformity of the 100-hour check and 2000-hour change intervals across all models, regardless of their differing capacities, suggests a shared service schedule framework applied consistently across the Atlas GmbH material handler range from 2010 onward.