Ahlmann Swing loaders, AZ
Coolant capacity & service interval
Ahlmann Swing loaders, AZ utilize coolant with a capacity range of 16 to 16,5 liters. Service intervals consist of 1500 hours or 2000 hours/24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| AZ 150f, Deutz TCD 3.6 L4 (IV/T4f) |
|
| AZ 210, Deutz BF6M 2012C / EU Stage II |
|
| AZ 210e, Deutz BF6M 2012C / EU Stage III |
|
Additional Notes
- The AZ 150f with the Deutz TCD 3.6 L4 (IV/T4f) engine carries a cooling system capacity of 16.5 liters, which is the total system fill volume used when servicing the entire circuit.
- The AZ 150f cooling system interval is set at 1500 hours under normal use conditions, which is a shorter interval than the 2000-hour figure specified for the AZ 210 variants.
- Both the AZ 210 with the Deutz BF6M 2012C EU Stage II engine and the AZ 210e with the EU Stage III variant share an identical cooling system capacity of 16 liters, despite the difference in emissions certification between the two configurations.
- The AZ 210 and AZ 210e cooling system change interval is defined by a dual condition of 2000 hours or 24 months under normal use, meaning whichever threshold is reached first would govern the service timing.
- The 0.5-liter difference in coolant capacity between the AZ 150f at 16.5 liters and the AZ 210 series at 16 liters reflects a variation tied to the engine platform, as the AZ 150f uses the four-cylinder Deutz TCD 3.6 L4 while the AZ 210 variants use the six-cylinder BF6M 2012C.