Volvo 160 (EU)

Automatic transmission fluid capacity & service interval

Volvo 160 (EU) automatic transmission fluid capacity is 8,2 liters. Service intervals include a check every 10000 km. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
164 (1973-1973)
  • Use: Normal
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1
164 (1973-1973)
  • Use: Alternative (acceptable)
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1
164 E (1973-1974)
  • Use: Normal
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1
164 E (1972-1972)
  • Use: Normal
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1
164 E (1972-1972)
  • Use: Alternative (acceptable)
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1
164 (1968-1972)
  • Use: Normal
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1
164 (1968-1972)
  • Use: Alternative (acceptable)
  • Capacity 8,2 liter
  • Check 10000 km
  • Code: 3/1

Additional Notes

  • The Volvo 160 (EU) automatic transmission carries a fluid capacity of 8.2 liters across all listed variants, which is a figure typical of a full system fill including the torque converter, valve body, and transmission pan combined.
  • A capacity at the 8.2-liter level generally reflects a total overhaul or dry-fill quantity rather than a simple drain-and-refill service, meaning a partial fluid exchange during routine maintenance would normally require a smaller volume.
  • The 164 (1968-1972) automatic transmission specifies both a normal and an alternative (acceptable) fluid type, each carrying the same 8.2-liter capacity and a 10,000 km check interval.
  • The 1973 model year 164 shares the identical 8.2-liter capacity and 10,000 km check interval seen in the 1968-1972 configuration, indicating no change in transmission fluid specification between those production periods.
  • The 164 E, introduced in the 1972 model year, also carries the 8.2-liter capacity with a 10,000 km check interval, and both normal and alternative (acceptable) fluid designations are listed for that single year.
  • The 164 E (1973-1974) retains the 8.2-liter capacity under normal use conditions with a 10,000 km check interval, consistent with the earlier 164 E specification from 1972.
  • A 10,000 km check interval, as specified across all listed rows, refers to a fluid level inspection rather than a full fluid replacement, meaning the transmission is monitored at that mileage point rather than drained on a fixed schedule.
  • The presence of an alternative (acceptable) fluid designation alongside the normal specification for the 164 and 164 E variants indicates that more than one fluid formulation was recognized as compatible, both at the same 8.2-liter fill quantity.

Other Systems