Volvo Asia S60L

Coolant capacity & service interval

The Volvo Asia S60L coolant specifications cover a capacity range of 8.9 to 12.3 liters. The data includes three configurations. The fluid type specified is coolant for normal use.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
S60L Hybrid (2015- )
  • Use: Normal
  • Capacity 12,3 liter
S60L 2.0T (2014- )
  • Use: Normal
  • Capacity 8,9 liter
S60L T5 (2014- )
  • Use: Normal
  • Capacity 8,9 liter

Additional Notes

  • The Volvo Asia S60L 2.0T cooling system holds 8.9 liters under normal use conditions, a capacity typical of a standard four-cylinder engine cooling circuit.
  • The S60L T5 shares the same 8.9-liter cooling system capacity as the 2.0T, with both variants introduced from 2014.
  • The S60L Hybrid carries a notably larger cooling system capacity of 12.3 liters under normal use conditions, reflecting the additional thermal management demands of a hybrid powertrain compared to the 8.9-liter figure seen in the non-hybrid variants.
  • The 12.3-liter figure for the S60L Hybrid represents a 38 percent increase over the 8.9-liter capacity of the 2.0T and T5, a difference consistent with hybrid systems requiring separate cooling loops for the electric motor, inverter, or battery components.
  • All three S60L configurations list cooling system capacity under normal use conditions, meaning the 8.9-liter and 12.3-liter values apply to standard operating environments rather than severe-duty cycles.
  • The S60L Hybrid cooling system specification applies to vehicles from 2015, one model year after the 2.0T and T5 variants, which both carry a start year of 2014.

Other Systems