Volkswagen (VW) Multivan / California, ST (EU)

Additional Notes

• Across all four Volkswagen Multivan / California T7 engine variants covered — the 1.4 eHybrid, 1.5 TSI, 2.0 TDI, and 2.0 TFSI — the coolant specification follows a level-based fill standard rather than a fixed volume. The instruction to maintain coolant between the minimum and maximum marks means the service fill is determined by the reservoir's visible range, not a measured quantity.
• No numeric capacity figure in liters is listed for any of the T7 variants. A "between min and max" specification is typical for top-up and inspection procedures, where the technician adds only enough fluid to bring the level within the marked range on the expansion tank.
• The 1.4 eHybrid (160 kW) shares the same 48-month / 60,000 km check interval as the combustion-only variants. In hybrid powertrains, the cooling system often serves both the internal combustion engine and the high-voltage components, making the shared interval notable in the context of a more complex thermal management setup.
• The 1.5 TSI (100 kW) and 2.0 TFSI (150 kW) petrol variants both carry the 48-month / 60,000 km check interval under normal use conditions, with coverage beginning in 2021.
• The 2.0 TDI (110 kW) DPF variant, with a starting year of 2022, carries the same 48-month / 60,000 km check interval as the earlier petrol and hybrid entries, indicating a uniform coolant inspection schedule across the T7 range regardless of fuel type.
• All four variants specify normal use conditions for the coolant check interval. No severe-use interval variation appears in the specifications for any of the T7 configurations listed.