Volkswagen (VW) Eurovan, 7D (USA / CAN)
Coolant capacity & service interval
Volkswagen Eurovan, 7D (USA / CAN) coolant capacity ranges from 9 to 11,4 liters. The service interval requires a check every 20000 miles. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Eurovan 2.8 V6 24V (150 kW) (2000-2004) |
|
| Eurovan 2.8 VR6 (103 kW) (1999-2000) |
|
Additional Notes
- The Volkswagen Eurovan 7D cooling system capacity varies depending on the number of heat exchangers installed. A single heat exchanger configuration holds 9 to 9.2 liters, while two heat exchangers raise the fill volume to 10.8 liters, and two heat exchangers combined with an additional heater bring the total to 11.4 liters.
- The 2.8 V6 24V (150 kW) engine, covering model years 2000-2004, shares the same three-tier capacity structure as the earlier 2.8 VR6 (103 kW) engine from 1999-2000, though the V6 24V lists a slightly wider range of 9 to 9.2 liters for the single heat exchanger configuration rather than a fixed 9-liter figure.
- The difference between a single and dual heat exchanger setup represents a capacity increase of approximately 1.8 liters, which reflects the additional coolant volume required to circulate through a second cabin heating circuit.
- Adding an auxiliary heater to the two heat exchanger configuration adds a further 0.6 liters, bringing the maximum cooling system fill to 11.4 liters across both engine variants.
- Both the 2.8 V6 24V and the 2.8 VR6 share a coolant check interval of 20,000 miles under normal use conditions, applying uniformly regardless of which heat exchanger configuration is present.