Vauxhall Velox

Manual transmission fluid capacity & service interval

Vauxhall Velox manual transmission fluid capacity ranges from 1,19 to 2,05 liters. Service intervals include checking at 3000 km and changing at 18000 km. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Velox 2.6, PB (1962-1965)
  • Use: Normal
  • Capacity 1,19 liter
  • Check 3000 km
  • Code: 3/1
  • Velox 2.6, PB (1962-1965)
  • With overdrive
  • Use: Normal
  • Capacity 2,05 liter
  • Check 3000 km
  • Change 18000 km
  • Code: 4/1
Velox 3.3, PB (1962-1965)
  • Use: Normal
  • Capacity 1,19 liter
  • Check 3000 km
  • Code: 3/1
Velox 3.3, PB (1962-1965)
  • Use: Normal
  • Capacity 1,36 liter
  • Check 3000 km
  • Code: 4/1
  • Velox 3.3, PB (1962-1965)
  • With overdrive
  • Use: Normal
  • Capacity 2,05 liter
  • Check 3000 km
  • Change 18000 km
  • Code: 4/1
Velox, PA (1960-1962)
  • Use: Normal
  • Capacity 1,19 liter
  • Check 3000 km
  • Code: 3/1
  • Velox, PA (1960-1962)
  • With overdrive
  • Use: Normal
  • Capacity 2,05 liter
  • Check 3000 km
  • Change 18000 km
  • Code: 4/1

Additional Notes

  • The Vauxhall Velox manual transmission without overdrive holds 1.19 liters across the PA (1960-1962) and the PB 2.6 (1962-1965), indicating a consistent service fill volume for the standard gearbox across both generations.
  • The PB 3.3 manual transmission is the only configuration listed with two distinct capacity values, 1.19 liters and 1.36 liters, suggesting a variation between gearbox variants fitted to that engine within the 1962-1965 model range.
  • All manual transmissions with overdrive across the PA and PB series share a capacity of 2.05 liters, which is notably higher than the 1.19-1.36 liter range seen in standard gearboxes, reflecting the additional fluid volume the overdrive unit requires.
  • A check interval of 3000 km applies uniformly to every configuration in the specifications, covering both standard and overdrive-equipped transmissions regardless of engine size or model series.
  • A fluid change interval of 18000 km is specified exclusively for overdrive-equipped transmissions. No change interval appears in the specifications for standard manual transmissions without overdrive.
  • The absence of a change interval for the standard manual transmission configurations means the 3000 km check interval is the only scheduled service milestone listed for those units.
  • All specifications across every row are assigned a normal use condition, meaning none of the capacity or interval values listed are tied to severe-duty operating requirements.

Other Systems