Vauxhall Cascada, W13

Additional Notes

• The Vauxhall Cascada W13 automatic transaxle carries a dry fill capacity of 8 to 8.5 liters across all three 1.6 Turbo configurations, a figure that reflects the total fluid volume required when filling a fully drained or rebuilt unit from empty.
• Service fill capacity for the 1.6 Turbo transaxle is listed at 4 to 6 liters, which is the reduced volume needed when fluid is exchanged during a routine service rather than a complete overhaul, since residual fluid remains in the torque converter and passages.
• The range of 4 to 6 liters for the 1.6 Turbo service fill indicates variability depending on how much fluid is retained in the unit during a partial drain, making an exact refill quantity dependent on the specific procedure used.
• The 2.0 CDTI (121 kW) covering 2013-2015 lists a single capacity figure of 6.7 liters with no separate dry fill or service fill distinction, meaning the specification does not differentiate between overhaul and routine service quantities for that engine variant.
• All four rows share an identical check interval of 12 months or 30,000 km under normal use conditions, applying equally to both the 1.6 Turbo and 2.0 CDTI automatic transaxle configurations.
• The 1.6 Turbo (125 kW) spans two separate row entries covering 2013-2015 and 2015-2018, yet both carry identical capacity and interval specifications, indicating no change in automatic transmission fluid requirements across that production period.
• The 1.6 Turbo (100 kW) covering 2018-2019 shares the same 8 to 8.5 liter dry fill, 4 to 6 liter service fill, and 12-month/30,000 km check interval as the higher-output 125 kW variant, despite the difference in power output.
• The 2.0 CDTI automatic transaxle capacity of 6.7 liters falls below the 8 to 8.5 liter dry fill figure of the 1.6 Turbo units, reflecting a different transmission unit with a smaller total fluid volume.