Toyota Yaris (EU)

Transfer case fluid capacity & service interval

Toyota Yaris (EU) transfer case fluid capacity is 0,4-0,5 liter. Service intervals for check and change are 20000 km or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
GR Yaris (206 kW) (2024- )
  • Use: Normal
  • Capacity 0,4-0,5 liter
  • Check 20000 km/ 12 months
  • Change 20000 km/ 12 months
  • Code: GF1A
GR Yaris (192 kW) (2020-2024)
  • Use: Normal
  • Capacity 0,4-0,5 liter
  • Check 20000 km/ 12 months
  • Change 20000 km/ 12 months
  • Code: GF1A

Additional Notes

  • The Toyota GR Yaris transfer case, referred to in the specifications as a transferbox, holds between 0.4 and 0.5 liters of fluid, which is a notably small capacity consistent with a compact transfer unit rather than a full-size four-wheel-drive system.
  • The 0.4-0.5 liter range represents a service fill figure, meaning the volume expected when topping up or refilling during routine maintenance rather than a complete overhaul drain-and-fill quantity.
  • Both the 192 kW and 206 kW variants share an identical fluid capacity range of 0.4-0.5 liters, indicating no difference in transferbox volume between the two power outputs.
  • Under normal use conditions, the 192 kW GR Yaris (2020-2024) carries a check interval of 20,000 km or 12 months, whichever comes first, applied alongside an equally frequent change interval of the same duration.
  • The alignment of the check and change intervals at 20,000 km or 12 months for the 192 kW variant means the fluid is not simply inspected between changes but is replaced at every scheduled service point.
  • The 206 kW GR Yaris, introduced from 2024, follows the same normal-use check and change schedule of 20,000 km or 12 months as the 192 kW model, resulting in no differentiation in service frequency between the two engine variants.

Other Systems