Toyota Urban Cruiser, XP10 (EU)

Transfer case fluid capacity & service interval

Toyota Urban Cruiser, XP10 (EU) requires transfer case fluid with a capacity of 0,5 liter. Service intervals occur every 30000 km or 48 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Urban Cruiser 1.4 D-4D 4WD (2009-2016)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 30000 km/ 48 months

Additional Notes

  • The Toyota Urban Cruiser XP10 (EU) 1.4 D-4D 4WD carries a transfer case fluid capacity of 0.5 liter, which is a notably small volume consistent with the compact transfer box units found in light-duty crossover drivetrains.
  • A capacity of 0.5 liter indicates a service fill quantity, meaning the figure reflects the amount used during a routine fluid change rather than a full overhaul or dry-fill scenario.
  • The fluid change interval for the 1.4 D-4D 4WD transfer case is set at 30,000 km or 48 months, whichever comes first, and applies under normal use conditions.
  • The 48-month time limit alongside the 30,000 km distance interval means that even in low-mileage situations, the fluid is due for replacement once four years have elapsed under normal operating conditions.
  • The specification covers the 2009-2016 model years of the Urban Cruiser XP10 in EU configuration, applying consistently across that entire production span for the 1.4 D-4D 4WD variant.

Other Systems