Toyota Proace Verso (EU)

Automatic transmission fluid capacity & service interval

Toyota Proace Verso (EU) automatic transmission fluid capacity ranges from 1,9 to 7 liters. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Proace Verso 2.0 D-4D (130 kW) (2018- )
  • Use: Normal
  • Capacity 6,8 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AMN8 8/1
Proace Verso 1.6 D-4D (70 kW) (2016-2018)
  • Use: Normal
  • Capacity 2,2 liter (Dry fill)
  • Capacity 1,9 liter (Service fill)
  • Code: MCP 6/1
Proace Verso 2.0 D-4D (110 kW) (2016-2018)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AM6 6/1
Proace Verso 2.0 D-4D (110 kW) DANGEL 4x4 (2016-2018)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AM6 6/1
Proace Verso 2.0 D-4D (130 kW) (2016-2018)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AM6 6/1

Additional Notes

  • The Toyota Proace Verso (EU) 1.6 D-4D (70 kW) carries a semi-automatic transaxle with a dry fill capacity of 2.2 liters, which is notably lower than the 2.0 D-4D variants, reflecting the smaller and mechanically simpler nature of a semi-automatic unit compared to a fully automatic transaxle.
  • The 1.6 D-4D (70 kW) semi-automatic transaxle has a service fill capacity of 1.9 liters, meaning a routine fluid change displaces approximately 86% of the total dry fill volume — a relatively high ratio indicating limited fluid retention in ancillary passages during a drain.
  • The 2.0 D-4D (110 kW) and 2.0 D-4D (130 kW) automatic transaxles from 2016-2018 share an identical dry fill capacity of 7 liters, with a service fill range of 3-4 liters, meaning a standard fluid change replaces roughly 43-57% of total system volume.
  • The 2.0 D-4D (110 kW) DANGEL 4x4 variant from 2016-2018 carries the same automatic transaxle dry fill of 7 liters and service fill range of 3-4 liters as the standard two-wheel-drive 110 kW configuration, indicating the DANGEL four-wheel-drive conversion does not alter the primary transaxle fluid specifications.
  • The 2.0 D-4D (130 kW) variant introduced from 2018 onward uses a revised automatic transaxle with a dry fill of 6.8 liters, a reduction of 0.2 liters compared to the earlier 7-liter specification shared across 2016-2018 models of the same output class.
  • The 2.0 D-4D (130 kW) from 2018 onward specifies a fixed service fill of 3.5 liters, replacing the 3-4 liter range used in the 2016-2018 generation, which suggests a more precisely defined drain-and-fill procedure in the updated transaxle design.
  • All rows across the Proace Verso automatic transmission fluid specifications are designated for normal use conditions, meaning none of the capacity values listed are associated with a severe-duty or extended-interval service scenario.

Other Systems