Toyota Land Cruiser, J250 (USA / CAN)

Coolant capacity & service interval

Toyota Land Cruiser, J250 (USA / CAN) coolant capacity ranges from 2,4 to 13,5 liters. Service intervals include checks every 15000 miles or 18 months and changes every 100000 miles or 120 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Land Cruiser 2.4 AWD Hybrid (2023- )
  • Use: Normal
  • Capacity 11,5-13,5 liter
  • Capacity 2,4 liter (Power control unit)
  • Check 15000 miles/ 18 months
  • Change 100000 miles/ 120 months

Additional Notes

  • The cooling system capacity for the Toyota Land Cruiser 2.4 AWD Hybrid spans a range of 11.5 to 13.5 liters, which reflects a service fill volume that can vary depending on how completely the system is drained and refilled during a coolant service.
  • A separate coolant capacity of 2.4 liters is specified for the power control unit, which is a dedicated thermal management circuit for the hybrid drivetrain electronics rather than the combustion engine cooling loop.
  • Under normal use conditions, a coolant check interval of 15,000 miles or 18 months is specified, whichever comes first, indicating a periodic inspection rather than a full fluid exchange at that interval.
  • The coolant change interval under normal use conditions is set at 100,000 miles or 120 months, the latter equating to a 10-year service life before a full coolant replacement is due.
  • The presence of two distinct coolant capacities in the 2.4 AWD Hybrid specification reflects the dual-circuit cooling architecture common in hybrid vehicles, where the internal combustion engine and the power electronics are cooled by separate fluid loops.

Other Systems