Toyota Celica, A

Clutch fluid capacity & service interval

Toyota Celica, A models utilize clutch fluid with a capacity range between min and max. Service intervals include checking at 7500 km or 6 months and 10000 km or 6 months, with fluid changes at 30000 km or 24 months and 40000 km or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Celica Supra 2.8, MA6 (1982-1986)
  • Use: Normal
  • Between min and max.
  • Check 7500 km/ 6 months
  • Change 30000 km/ 24 months
Celica 1.6 ST, TA6 (1981-1985)
  • Use: Normal
  • Between min and max.
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Celica 2.0 GT, RA63 (1981-1983)
  • Use: Normal
  • Between min and max.
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months
Celica 2.0 XT, RA60/61 (1981-1985)
  • Use: Normal
  • Between min and max.
  • Check 10000 km/ 6 months
  • Change 40000 km/ 24 months

Additional Notes

  • Across the Toyota Celica A-series lineup from 1981-1986, all four configurations use a hydraulic clutch system, meaning clutch fluid level and condition are maintained through a dedicated reservoir rather than a mechanical linkage adjustment.
  • The 1.6 ST (TA6), 2.0 GT (RA63), and 2.0 XT (RA60/61) share identical service intervals, with fluid checks specified at every 10,000 km or 6 months and fluid changes at every 40,000 km or 24 months under normal use conditions.
  • The Celica Supra 2.8 (MA6), covering 1982-1986, carries a more frequent check interval of 7,500 km or 6 months, compared to the 10,000 km interval applied to the three other configurations.
  • The Celica Supra 2.8 (MA6) also specifies a change interval of 30,000 km or 24 months, which is 10,000 km shorter than the 40,000 km change interval shared by the 1.6 ST, 2.0 GT, and 2.0 XT variants.
  • All four configurations express the fluid level specification as "between min and max," referring to the minimum and maximum markings on the clutch fluid reservoir, rather than a fixed volume figure.
  • The 24-month time-based change interval is consistent across all four configurations regardless of the differing distance-based intervals, indicating that time elapsed is treated as an equally valid trigger for fluid replacement.
  • The 2.0 GT (RA63) covers only 1981-1983, a narrower model year span than the 1.6 ST and 2.0 XT variants, both of which extend through 1985 within the same A-series generation.

Other Systems