Toyota Camry, XV50 (USA / CAN)

Coolant capacity & service interval

Toyota Camry, XV50 (USA / CAN) coolant capacity ranges from 3,2 to 9,2 liters. Service intervals include checks at 8000 km/6 months or 15000 miles/18 months, and changes at 80000 km/60 months, 160000 km/120 months, 50000 miles/60 months, or 100000 miles/120 months. The data covers 12 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Camry 2.5 16V (CAN), ASV50 (2012-2017)
  • Use: Normal
  • Capacity 7,3 liter
  • Check 8000 km/ 6 months
  • Change 80000 km/ 60 months
Camry 2.5 16V (CAN), ASV50 (2012-2017)
  • Use: First change only
  • Capacity 7,3 liter
  • Check 8000 km/ 6 months
  • Change 160000 km/ 120 months
Camry 2.5 16V (USA), ASV50 (2012-2017)
  • Use: Normal
  • Capacity 7,3 liter
  • Check 15000 miles/ 18 months
  • Change 50000 miles/ 60 months
Camry 2.5 16V (USA), ASV50 (2012-2017)
  • Use: First change only
  • Capacity 7,3 liter
  • Check 15000 miles/ 18 months
  • Change 100000 miles/ 120 months
Camry 3.5 V6 24V (CAN), GSV50 (2012-2017)
  • Use: Normal
  • Capacity 9,1-9,2 liter
  • Check 8000 km/ 6 months
  • Change 80000 km/ 60 months
Camry 3.5 V6 24V (CAN), GSV50 (2012-2017)
  • Use: First change only
  • Capacity 9,1-9,2 liter
  • Check 8000 km/ 6 months
  • Change 160000 km/ 120 months
Camry 3.5 V6 24V (USA), GSV50 (2012-2017)
  • Use: Normal
  • Capacity 9,2 liter
  • Check 15000 miles/ 18 months
  • Change 50000 miles/ 60 months
Camry 3.5 V6 24V (USA), GSV50 (2012-2017)
  • Use: First change only
  • Capacity 9,2 liter
  • Check 15000 miles/ 18 months
  • Change 100000 miles/ 120 months
Camry Hybrid (CAN), AVV50 (2012-2017)
  • Use: Normal
  • Capacity 7,2 liter
  • Capacity 3,2 liter (Power control unit)
  • Check 8000 km/ 6 months
  • Change 80000 km/ 60 months
Camry Hybrid (CAN), AVV50 (2012-2017)
  • Use: First change only
  • Capacity 7,2 liter
  • Capacity 3,2 liter (Power control unit)
  • Check 8000 km/ 6 months
  • Change 160000 km/ 120 months
Camry Hybrid (USA), AVV50 (2012-2017)
  • Use: Normal
  • Capacity 7,2 liter
  • Capacity 3,2 liter (Power control unit)
  • Check 15000 miles/ 18 months
  • Change 50000 miles/ 60 months
Camry Hybrid (USA), AVV50 (2012-2017)
  • Use: First change only
  • Capacity 7,2 liter
  • Capacity 3,2 liter (Power control unit)
  • Check 15000 miles/ 18 months
  • Change 100000 miles/ 120 months

Additional Notes

  • The Toyota Camry XV50 cooling system specifications cover three distinct powertrain variants across the 2012-2017 model years: the 2.5-litre four-cylinder (ASV50), the 3.5-litre V6 (GSV50), and the Hybrid (AVV50), each carrying a different coolant capacity.
  • The 2.5 16V ASV50 holds 7.3 litres of coolant, a figure consistent across both the Canadian and US market specifications. A capacity at this level is typical for a four-cylinder engine cooling system and reflects a standard service fill volume rather than a full overhaul drain.
  • The 3.5 V6 GSV50 requires a notably larger coolant volume. The Canadian market specification lists a capacity range of 9.1-9.2 litres, while the US market specification states a fixed 9.2 litres. The range in the Canadian data reflects minor variation that can occur between individual fills due to air pockets or measurement tolerances.
  • The Camry Hybrid AVV50 carries two separate coolant circuits. The main engine circuit holds 7.2 litres, while the power control unit circuit holds an additional 3.2 litres. These circuits serve different thermal management functions and must be serviced independently.
  • All Canadian market variants share a coolant check interval of every 8,000 km or 6 months, whichever comes first. The US market equivalents specify a check interval of every 15,000 miles or 18 months. Both intervals apply uniformly across the four-cylinder, V6, and Hybrid configurations.
  • Under normal use conditions, the Canadian market change interval for all three variants is 80,000 km or 60 months. The US market normal change interval is 50,000 miles or 60 months. Both markets share the same 60-month time limit despite the difference in distance thresholds.
  • A first change only condition is listed separately for all variants in both markets. Under this condition, the initial coolant change interval is extended to 160,000 km or 120 months for Canadian specifications, and to 100,000 miles or 120 months for US specifications. This extended interval applies exclusively to the first drain-and-fill, after which subsequent changes revert to the normal use intervals.
  • The doubling of both the distance and time thresholds between the normal and first change only conditions across all variants reflects a factory-fill coolant formulation designed for extended initial service life before the standard replacement cycle begins.

Other Systems