Toyota bZ4X, EAM (EU)
Coolant capacity & service interval
Toyota bZ4X and EAM (EU) models require coolant with a capacity range of 4 to 7,4 liters. Service intervals include checks at 30000 km or 24 months, and changes at 90000 km or 195000 km or 132 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Toyota bZ4X EAM carries two separate coolant circuits: one serving the inverter and one serving the heater. Each circuit has its own capacity specification and is serviced independently.
- The inverter cooling system on the 150 kW variant holds 5.9 liters, while the same circuit on the 160 kW AWD variant holds 7.4 liters, reflecting the greater thermal load of the dual-motor all-wheel-drive configuration.
- The heater cooling system capacity is listed as 4 to 4.5 liters across both the 150 kW and 160 kW AWD variants, indicating no meaningful difference between the two powertrain outputs for that circuit.
- Under normal use conditions, both the inverter and heater cooling circuits share a change interval of 90000 km, regardless of powertrain variant.
- A first change only interval of 195000 km or 132 months applies to both cooling circuits on both variants. A first change only designation means the extended interval governs solely the initial fluid replacement, after which the standard normal-use schedule takes over.
- All four circuits across both variants share a check interval of every 30000 km or 24 months, applying equally under both normal and first change only use conditions.
- The 132-month figure tied to the first change only interval equals 11 years, making the time-based trigger the more likely governing factor for vehicles accumulating lower annual mileage.