Tata Xenon
Power steering fluid capacity & service interval
The Tata Xenon uses power steering fluid with a capacity of 1.4 liters. The data covers 4 configurations of the model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Xenon 2.2 D DPF (2012-2017) |
|
| Xenon 2.2 D DPF 4x4 (2012-2017) |
|
| Xenon 2.2 D (2009- ) |
|
| Xenon 2.2 D 4x4 (2009- ) |
|
Additional Notes
- The Tata Xenon power steering system carries a fluid capacity of 1.4 liters across all four configurations covered in the specifications.
- A 1.4-liter capacity is consistent with a hydraulic power steering reservoir and circuit fill, representing the total volume held within the pump reservoir, lines, and steering rack combined.
- All four configurations share an identical 1.4-liter capacity figure, meaning the addition of a four-wheel-drive drivetrain in the 4x4 variants does not alter the power steering fluid volume requirement.
- The two DPF-equipped variants, the Xenon 2.2 D DPF and the Xenon 2.2 D DPF 4x4, cover the 2012-2017 model years and carry the same 1.4-liter capacity as the non-DPF variants introduced from 2009.
- All specifications are listed under normal use conditions, meaning the capacity values apply to standard operating environments rather than severe-duty or off-road-intensive service classifications.
- No service interval mileage or time-based replacement schedule is listed in the specifications for any of the four configurations, with the data limited to fluid capacity figures only.