Subaru Legacy / Outback, BN, BS (EU)

Clutch fluid capacity & service interval

Subaru Legacy / Outback, BN, BS (EU) clutch fluid capacity ranges between min and max. Service intervals occur every 24 months or 30000 km. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Legacy / Outback 2.0D (2014-2019)
  • Use: Normal
  • Between min and max.
  • Check 24 months/ 30000 km
Legacy / Outback 2.0T (2014-2018)
  • Use: Normal
  • Between min and max.
  • Check 24 months/ 30000 km

Additional Notes

  • The Subaru Legacy / Outback BN/BS (EU) clutch fluid specification does not reference a fixed fill volume. Instead, the level is verified against the reservoir's minimum and maximum markers, which is standard practice for hydraulic clutch systems that share or maintain fluid within a sealed circuit rather than requiring periodic draining and refilling.
  • Both the 2.0D and 2.0T engine configurations share the same inspection interval under normal use conditions: every 24 months or 30,000 km, whichever comes first.
  • The 2.0D covers the full 2014-2019 model year span, while the 2.0T specification applies only to 2014-2018, representing a one-year difference in the covered range between the two engine variants.
  • Both configurations are noted as hydraulic clutch systems, meaning fluid condition and level directly affect clutch pedal feel and actuation performance, making the 24-month interval relevant regardless of low mileage accumulation.

Other Systems