Subaru Legacy / Outback, BD, BG, BK (EU)
Coolant capacity & service interval
Subaru Legacy / Outback, BD, BG, BK (EU) models require coolant with a capacity range of 5,8 to 6,4 liters. Service intervals for the fluid are 50000 km or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Legacy / Outback 2.5 4WD (1996-1999) |
|
| Legacy / Outback 2.0 (1994-1999) |
|
| Legacy / Outback 2.0 4WD (1994-1999) |
|
| Legacy / Outback 2.2 (1994-1998) |
|
| Legacy / Outback 2.2 4WD (1994-1998) |
|
Additional Notes
- The Subaru Legacy / Outback BD/BG/BK (EU) coolant system capacity across the 2.0, 2.0 4WD, and 2.5 4WD variants is uniformly 6 liters, indicating a consistent cooling system volume despite differences in drivetrain configuration.
- The 2.2-liter variant in two-wheel drive configuration carries a slightly larger cooling system capacity of 6.4 liters, the highest figure across all listed engine variants in the 1994-1998 range.
- The 2.2 4WD variant holds a notably lower capacity of 5.8 liters compared to the two-wheel drive 2.2, a difference of 0.6 liters that reflects how drivetrain packaging can affect cooling system volume within the same engine displacement.
- All five configurations share an identical service interval of 50,000 km or 24 months under normal use conditions, whichever comes first, meaning time elapsed is as much a factor as distance traveled when determining a coolant change.
- The 2.5 4WD variant covers the narrower model year span of 1996-1999, while the 2.0 and 2.2 variants begin from 1994, reflecting a later introduction of the 2.5-liter engine into the EU-market lineup.
- The 2.2-liter engine variants are listed through 1998 only, whereas the 2.0 and 2.5 4WD variants extend to 1999, meaning the final model year of the range does not include 2.2-liter coverage in these specifications.