Subaru Forester, SJ (EU)
Clutch fluid capacity & service interval
Subaru Forester, SJ (EU) uses clutch fluid with a capacity range between min and max. Service intervals require a check every 24 months or 30000 km. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Forester 2.0i (2015-2018) |
|
| Forester 2.0D (2013-2018) |
|
| Forester 2.0i (2013-2014) |
|
Additional Notes
- The Subaru Forester SJ (EU) clutch fluid specification applies to a hydraulic clutch system, meaning the clutch actuation is fluid-operated rather than cable-driven, and the reservoir level is the primary serviceable point.
- Rather than a fixed fill volume, the capacity specification for all three engine variants is expressed as a level range between a minimum and maximum mark on the reservoir, which is characteristic of a closed hydraulic system where fluid consumption indicates wear or leakage rather than routine depletion.
- The Forester 2.0D covers the full 2013-2018 model year span within the SJ generation, and the service interval for clutch fluid level inspection is set at 24 months or 30,000 km under normal use conditions, whichever comes first.
- The Forester 2.0i is split across two separate specification entries: one covering 2013-2014 and another covering 2015-2018, though both share identical service parameters of a min-to-max level check at 24 months or 30,000 km under normal use.
- The 24-month time component of the service interval means a level inspection is due regardless of mileage accumulation if two years have elapsed, which is relevant for low-mileage vehicles that may not reach the 30,000 km threshold within that period.
- All three rows carry a normal use condition designation, meaning the 24-month or 30,000 km inspection interval is not adjusted for more demanding driving environments within the listed specifications.