Subaru Forester, SG (EU)
Automatic transmission fluid capacity & service interval
Subaru Forester, SG (EU) uses automatic transmission fluid with a capacity range of 8,4 to 9,3 liters. Service intervals consist of checks every 30000 km or 24 months and changes every 60000 km or 48 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Forester 2.0 (2005-2008) |
|
| Forester 2.5 (2005-2008) |
|
| Forester 2.5 T (2005-2008) |
|
|
|
|
|
Additional Notes
- The Subaru Forester SG (EU) 2.0 naturally aspirated engine, covering the 2002-2005 and 2005-2008 model ranges, carries an automatic transmission fluid capacity of 8.4 liters, which is the lower of the two capacity figures present across all listed configurations.
- The 8.4-liter figure applies to the transmission and transferbox combined in the 2002-2005 variant, while the 2005-2008 variant lists only the transmission without a transferbox note, yet the capacity remains identical at 8.4 liters.
- The 2.0 T turbocharged variant from 2002-2005 carries a 9.3-liter capacity for the transmission and transferbox combined, representing a 0.9-liter increase over the non-turbocharged 2.0 of the same period.
- Both the 2.5 and 2.5 T variants from 2005-2008 share the 9.3-liter capacity figure, placing them in the same capacity class as the earlier turbocharged 2.0 T despite differing in engine displacement and aspiration.
- A capacity of 9.3 liters is a relatively high fill volume for an automatic transmission system, and in configurations that include a transferbox within the same service note, the figure reflects the combined fluid requirement of both units rather than the transmission alone.
- All five configurations share a uniform fluid check interval of 30,000 km or 24 months under normal use conditions, whichever comes first.
- The fluid change interval across all listed configurations is set at 60,000 km or 48 months under normal use conditions, representing a two-to-one ratio relative to the check interval in both distance and time terms.
- The consistent application of normal use conditions across all rows means none of the listed configurations carry a separate severe-use interval, and all interval figures apply to standard operating conditions as defined by that classification.