SsangYong XLV
Brake fluid capacity & service interval
SsangYong XLV uses brake fluid with a capacity range between min and max. Service intervals include a 12 month check and a 24 month change. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| XLV 1.6 e-XDi 2WD (2016-2021) |
|
| XLV 1.6 e-XDi 4WD (2016-2021) |
|
| XLV 1.6 e-XGi 2WD (2016-2021) |
|
| XLV 1.6 e-XGi 4WD (2016-2021) |
|
Additional Notes
- The SsangYong XLV brake fluid specification covers the hydraulic brake and clutch system as a shared circuit, meaning a single fluid reservoir serves both functions across all four configurations.
- No discrete fluid volume is listed for the brake and clutch system. Instead, the fill level is defined as sitting between the reservoir's minimum and maximum marks, which is the standard method for systems where precise capacity measurement is impractical during routine service.
- A check interval of 12 months applies under normal use conditions across all four XLV variants, covering both the 1.6 e-XDi diesel and 1.6 e-XGi petrol engines in 2WD and 4WD configurations.
- The change interval is set at 24 months for all listed configurations, regardless of drivetrain or engine type. A 24-month brake fluid replacement cycle is consistent with the hygroscopic nature of glycol-based brake fluids, which absorb moisture over time and lower the fluid's boiling point.
- The 2WD and 4WD variants of both the e-XDi and e-XGi engines share identical brake fluid service intervals, with no differentiation in check or change frequency between drivetrain layouts.
- The diesel e-XDi and petrol e-XGi variants also carry the same 12-month check and 24-month change schedule, indicating no engine-type-based variation in brake fluid service requirements across the 2016-2021 model range.