SsangYong Korando, C300
Automatic transmission fluid capacity & service interval
SsangYong Korando and C300 models require automatic transmission fluid with a capacity range of 6,1 to 6,6 liters. The service interval for fluid replacement is 100000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Korando 1.5 T-GDi (2019- ) |
|
| Korando 1.5 T-GDi 4WD (2019- ) |
|
| Korando 1.6 E-XDi (2019- ) |
|
| Korando 1.6 E-XDi 4WD (2019- ) |
|
Additional Notes
- The SsangYong Korando C300 automatic transaxle fluid capacity for the 1.5 T-GDi engine is a fixed 6.2 liters, applying equally to both the front-wheel-drive and 4WD variants starting from 2019.
- The 1.6 E-XDi engine, in both its front-wheel-drive and 4WD configurations from 2019, carries a capacity range of 6.1 to 6.6 liters rather than a single fixed value, reflecting a fill tolerance or variation in the refill amount depending on how completely the unit is drained during service.
- A slight capacity difference exists between the petrol and diesel engine families. The 1.5 T-GDi transaxle holds a fixed 6.2 liters, while the 1.6 E-XDi transaxle spans 6.1 to 6.6 liters, meaning the diesel unit can require up to 0.4 liters more fluid at the upper end of its range.
- All four configurations share a 100,000 km change interval, and all are classified under severe use conditions, meaning the 100,000 km figure applies specifically to demanding operating environments rather than standard driving cycles.
- The 4WD variants of both the 1.5 T-GDi and 1.6 E-XDi share identical automatic transaxle fluid specifications with their respective front-wheel-drive counterparts, indicating the drivetrain configuration does not alter the transaxle service requirements.