Skoda Kamiq, NW4
Brake fluid capacity & service interval
Skoda Kamiq NW4 uses brake fluid with a capacity of 1,15 liters. Service intervals include 24 months, 15000 km/12 months, and 30000 km/24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Kamiq 1.0 TSI (81 kW) (2020- ) |
|
| Kamiq 1.6 TDI (70 kW) (2020- ) |
|
| Kamiq 1.6 TDI (85 kW) (2020- ) |
|
| Kamiq 1.6 TDI (70 kW) (2019-2020) |
|
| Kamiq 1.6 TDI (85 kW) (2019-2020) |
|
Additional Notes
- The Skoda Kamiq NW4 brake fluid capacity is 1.15 liters across all listed engine variants, covering the hydraulic brake and clutch system as a combined circuit.
- A 1.15-liter capacity figure represents a service fill volume, meaning the amount used during a fluid change rather than a full system overhaul quantity.
- The 1.0 TSI (81 kW) variant carries a change interval of 24 months with no distance-based interval specified, making time the sole trigger for a fluid replacement under normal use conditions.
- Both 1.6 TDI variants, the 70 kW and 85 kW, share an identical service schedule: a fluid check at 15,000 km or 12 months, followed by a full change at 30,000 km or 24 months, whichever comes first under normal use.
- The check interval on the 1.6 TDI engines at 15,000 km or 12 months serves as an intermediate inspection point, distinct from the change interval, indicating a two-stage maintenance approach not present in the 1.0 TSI specification.
- The 30,000 km change interval on the 1.6 TDI engines aligns with the same 24-month time limit seen on the 1.0 TSI, meaning both engine families converge on a two-year maximum fluid life under normal conditions regardless of mileage differences.
- The 1.6 TDI 70 kW and 1.6 TDI 85 kW variants carry identical capacity and interval specifications despite differing in power output, indicating the brake and clutch system volume is not influenced by engine power rating within the diesel lineup.