Skoda Fabia IV, PJ
Manual transmission fluid capacity & service interval
Skoda Fabia IV, PJ manual transmission fluid has a capacity range of 2,1 to 2,3 liters. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Fabia IV 1.0 MPI (48 kW) (2021- ) |
|
| Fabia IV 1.0 MPI (59 kW) (2021- ) |
|
| Fabia IV 1.0 TSI (70 kW) (2021- ) |
|
| Fabia IV 1.0 TSI (81 kW) (2021- ) |
|
Additional Notes
- The Skoda Fabia IV (PJ) manual transmission fluid capacity is specified as a transaxle fill, meaning the gearbox and final drive share a single fluid reservoir rather than separate sumps.
- The 1.0 MPI variants in both 48 kW and 59 kW outputs share an identical transaxle capacity of 2.1 liters under normal use conditions.
- The 1.0 TSI 70 kW configuration also carries a 2.1-liter transaxle capacity, aligning with the MPI variants despite the difference in induction type.
- The 1.0 TSI 81 kW variant departs from the other three configurations with a transaxle capacity of 2.3 liters, representing the highest manual transmission fluid volume across all Fabia IV (PJ) specifications listed here.
- The 0.2-liter difference between the 81 kW TSI and the remaining three variants is consistent with a physically larger or differently geared transaxle unit suited to the higher output engine.
- All four configurations carry normal use condition designations, meaning the stated 2.1- and 2.3-liter capacities apply to standard operating environments rather than severe-duty cycles.
- Starting from the 2021 model year, all four Fabia IV (PJ) engine variants share the same transaxle type designation, confirming a manual unit across the entire lineup covered by these specifications.