Skoda Citigo, NF, NE
Brake fluid capacity & service interval
Skoda Citigo, NF, NE models require brake fluid with a capacity range of 1 to 1.15 liters. Service intervals include checks every 15000 km or 12 months and fluid changes every 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Citigo 1.0 CNG (50 kW) (2012-2020) |
|
| Citigo 1.0 (44 kW) (2011-2020) |
|
| Citigo 1.0 (55 kW) (2011-2020) |
|
Additional Notes
- The Skoda Citigo brake fluid capacity is listed as 1 to 1.15 liters across all three engine variants, a range that reflects the typical fill tolerance of a hydraulic brake and clutch system rather than a fixed single volume.
- The 44 kW and 55 kW petrol variants share identical brake fluid specifications for the 2011-2020 model years, with no differentiation in capacity or service intervals between the two power outputs.
- The CNG 1.0 (50 kW) variant, available from 2012, carries the same 1 to 1.15 liter capacity and the same check and change intervals as the petrol variants, despite the addition of a compressed natural gas system.
- A check interval of every 15,000 km or 12 months, whichever comes first, applies under normal use conditions across all three variants, meaning the fluid level and condition are assessed more frequently than the fluid is replaced.
- The change interval is set at 24 months for all listed variants under normal use conditions, a time-based interval rather than a distance-based one, which reflects the hygroscopic nature of brake fluid and how moisture absorption over time degrades performance regardless of mileage.
- The note specifying a hydraulic brake and clutch system indicates the brake fluid reservoir serves both functions simultaneously, which is consistent with the shared hydraulic circuit found in vehicles equipped with a hydraulically actuated clutch.