Skoda 1000/1100MB

Brake fluid capacity & service interval

The Skoda 1000/1100MB uses brake fluid with a capacity of 0.35 liter. Six configurations of this model are covered in the data.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
1100MB, 715 (1968-1969)
  • Use: Normal
  • Capacity 0,35 liter
1100MBX Coupé, 723 (1968-1969)
  • Use: Normal
  • Capacity 0,35 liter
1000MB, 721 (1966-1969)
  • Use: Normal
  • Capacity 0,35 liter
1000MBG, 710 (1966-1968)
  • Use: Normal
  • Capacity 0,35 liter
1000MBX Coupé, 990T (1966-1968)
  • Use: Normal
  • Capacity 0,35 liter
1000MB, 990 (1964-1966)
  • Use: Normal
  • Capacity 0,35 liter

Additional Notes

  • The Skoda 1000/1100MB hydraulic brake system holds 0.35 liter of brake fluid across all listed variants, a figure that represents the total fluid volume of the complete hydraulic circuit including the master cylinder reservoir, lines, and wheel cylinders.
  • The 0.35 liter capacity is consistent across both the 1000MB engine variants — the 990 cc unit produced from 1964-1966 and the 721 cc unit from 1966-1969 — indicating no change in brake system volume between those two engine generations.
  • The 1000MBG, a wagon or estate body variant with the 710 engine code produced from 1966-1968, shares the same 0.35 liter brake fluid capacity as the standard sedan, suggesting a common brake hydraulic architecture regardless of body style.
  • The 1000MBX Coupé carrying the 990T engine designation, produced from 1966-1968, also specifies 0.35 liter for the hydraulic brake system, placing the coupé body style on the same brake circuit specification as the other variants in the range.
  • With the introduction of the 1100MB series from 1968-1969, represented by both the 715 sedan and the 723-coded 1100MBX Coupé, the brake fluid capacity remained at 0.35 liter, unchanged from the earlier 1000MB configurations despite the displacement increase.
  • All six listed configurations carry a normal use condition designation, meaning the 0.35 liter capacity figure applies to standard operating conditions rather than a modified or severe-duty service scenario.

Other Systems