Singer Vogue

Manual transmission fluid capacity & service interval

Singer Vogue manual transmission fluid capacity ranges from 1,56 to 2,5 liters. Service intervals include checks at 5000 km and changes at 800 km or 10000 km. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Vogue Series IV (1965-1967)
  • Use: Normal
  • Capacity 1,9 liter
  • Capacity 2,5 liter (+ overdrive)
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
Vogue Series IV (1965-1967)
  • Use: Initial service
  • Capacity 1,9 liter
  • Capacity 2,5 liter (+ overdrive)
  • Change 800 km
  • Code: 4/1
Vogue Series III (1964-1965)
  • Use: Normal
  • Capacity 1,9 liter
  • Capacity 2,5 liter (+ overdrive)
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
Vogue Series III (1964-1965)
  • Use: Initial service
  • Capacity 1,9 liter
  • Capacity 2,5 liter (+ overdrive)
  • Change 800 km
  • Code: 4/1
Vogue Series II (1962-1964)
  • Use: Normal
  • Capacity 1,56 liter
  • Capacity 2,27 liter (+ overdrive)
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
Vogue Series II (1962-1964)
  • Use: Initial service
  • Capacity 1,56 liter
  • Capacity 2,27 liter (+ overdrive)
  • Change 800 km
  • Code: 4/1
Vogue Series I (1961-1962)
  • Use: Normal
  • Capacity 1,56 liter
  • Capacity 2,27 liter (+ overdrive)
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
Vogue Series I (1961-1962)
  • Use: Initial service
  • Capacity 1,56 liter
  • Capacity 2,27 liter (+ overdrive)
  • Change 800 km
  • Code: 4/1

Additional Notes

  • The Singer Vogue manual transmission holds 1.56 liters in Series I and II configurations, rising to 1.9 liters in Series III and IV, reflecting a capacity increase introduced with the 1964 model revision.
  • When the optional overdrive unit is fitted, the total fluid capacity grows substantially in each series. Series I and II require 2.27 liters with overdrive, while Series III and IV require 2.5 liters, accounting for the additional volume held within the overdrive mechanism itself.
  • The difference between the standard and overdrive capacities amounts to 0.71 liters in Series I and II, and 0.6 liters in Series III and IV, meaning the overdrive unit adds a meaningful but not dominant share of the total fill volume.
  • Under normal use conditions, a fluid level check is specified at every 5,000 km across all four series, with a full fluid change due at 10,000 km intervals.
  • An initial service change is specified at 800 km for all series, applying only to that first drain interval. At 800 km, a newly filled transmission will have accumulated early wear particles and fluid contamination from the break-in period, which is the reason a short-interval first change is prescribed separately from the standard 10,000 km cycle.
  • The capacity figures listed across all rows represent service fill volumes, meaning the amount of fluid required when refilling a drained transmission rather than a fully disassembled overhaul rebuild, which would typically require precise measurement to account for residual fluid in passages and components.
  • Series I and Series II share identical capacity and interval specifications, with 1.56 liters standard, 2.27 liters with overdrive, an 800 km initial change, a 5,000 km check, and a 10,000 km change interval.
  • Series III and Series IV likewise share identical specifications with each other, at 1.9 liters standard and 2.5 liters with overdrive, maintaining the same 800 km initial service and 10,000 km normal change interval established in the earlier series.

Other Systems