Seat León, KL (EU)
Differential fluid capacity & service interval
Seat León, KL (EU) differential fluid capacity ranges from 0,4 to 0,9 liter. The service interval is 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The Seat León KL (EU) 2.0 TDI (110 kW) 4Drive carries a rear differential fluid capacity of 0.9 liter under normal use conditions, a figure consistent with a compact rear differential housing rather than a larger transfer case or transaxle assembly.
- The 2.0 TFSI (228 kW) 4Drive shares that same 0.9-liter rear differential capacity, placing both the diesel 4Drive and the higher-output petrol 4Drive variant at an identical fill volume despite their differing powertrains.
- The front axle lock differential on the 2.0 TFSI (180 kW) and 2.0 TFSI (221 kW) variants specifies a capacity range of 0.4-0.6 liter, which reflects a variable fill window rather than a fixed volume, typically indicating that the correct level is determined by a fill-to-overflow procedure rather than a measured pour.
- Both front axle lock differential entries carry a 24-month change interval under normal use conditions, a time-based service trigger that applies regardless of mileage accumulated within that period.
- The rear differential entries for the 4Drive variants list no change interval, only a capacity figure, meaning fluid volume is the sole specification recorded for those assemblies under normal use conditions.
- The front axle lock differential appears exclusively on the 2.0 TFSI variants starting from 2021, while the rear differential configuration is shared across both the 2.0 TDI 4Drive from 2020 and the 2.0 TFSI 4Drive from 2021.