Samsung SM5, L43

Automatic transmission fluid capacity & service interval

Samsung SM5, L43 uses automatic transmission fluid with a capacity range of 3,5 to 7,6 liters. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
SM5 2.0 dCi (2011-2018)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AJ0 6/1
SM5 2.0 dCi DPF (2011-2018)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AJ0 6/1
SM5 2.5 V6 (2011-2018)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AJ0 6/1
SM5 3.0 dCi (2011-2018)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AJ0 6/1
SM5 3.5 V6 (2011-2018)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 3,5 liter (Service fill)
  • Code: AJ0 6/1

Additional Notes

  • The Samsung SM5 L43 automatic transaxle carries a dry fill capacity of 7.6 liters across all five engine variants covered in the 2011-2018 specifications, meaning a complete overhaul or new unit installation requires the full volume to bring the system to operating level from empty.
  • The service fill capacity is listed at 3.5 liters for every variant, which represents the amount of fluid displaced and replaced during a routine drain-and-refill procedure, as the torque converter retains a significant portion of fluid that does not drain under normal service conditions.
  • The difference between the 7.6-liter dry fill and the 3.5-liter service fill reflects that roughly 4.1 liters remain in the transmission circuit during a standard fluid change, a common characteristic of automatic transaxles where the torque converter is not separately drained.
  • All five engine configurations, covering the 2.0 dCi, 2.0 dCi DPF, 2.5 V6, 3.0 dCi, and 3.5 V6, share identical capacity figures, indicating the same automatic transaxle unit is paired with each powertrain across the 2011-2018 model range.
  • Each row is designated under normal use conditions, meaning the listed 3.5-liter service fill applies to standard operating environments rather than severe-duty cycles such as towing, extreme temperatures, or frequent short-trip driving.
  • The 2.0 dCi and 2.0 dCi DPF variants are specified separately despite sharing the same capacity values, with the DPF designation indicating the presence of a diesel particulate filter on one variant while the transmission specifications remain unchanged between the two.

Other Systems