Samsung QM5, H45

Additional Notes

• The Samsung QM5 H45 manual transaxle carries two capacity figures across all listed configurations: a range of 1.8–2 liters and a fixed value of 2 liters, both recorded under normal use conditions.
• The 1.8–2 liter range reflects a service fill capacity, meaning the actual fluid accepted during a drain-and-refill may fall anywhere within that band depending on residual fluid left in the unit.
• The fixed 2-liter figure represents the total or overhaul capacity, indicating the full volume the transaxle holds when completely dry before initial fill.
• Both capacity entries appear identically across the 2.0 dCi 110 kW AWD, 2.0 dCi 127 kW AWD, 2.5 16V 4x2, and 2.5 16V 4x4 variants, meaning no variation in manual transaxle fluid volume exists between engine outputs or drivetrain configurations within the H45 generation.
• All specifications are assigned to normal use conditions, with no separate severe-duty interval or capacity listed for any of the covered configurations.
• The 2.0 dCi engine appears in two distinct output ratings for the QM5 H45 — 110 kW and 127 kW — yet both share the same 1.8–2 liter service range and 2-liter total transaxle capacity.
• The 2.5 16V petrol engine configurations, available in both 4x2 and 4x4 drivetrains, carry the same transaxle capacity figures as the diesel variants, indicating a common manual transaxle unit across the petrol and diesel lines in the H45.