Samsung QM3, J87
Automatic transmission fluid capacity & service interval
Samsung QM3 and J87 models require automatic transmission fluid with a capacity range of 1,4 to 1,7 liters. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| QM3 1.2 TCe 120 Energy (2013-2018) |
|
| QM3 1.5 dCi DPF (2013-2018) |
|
Additional Notes
- Both the QM3 1.2 TCe 120 Energy and the QM3 1.5 dCi DPF share identical automatic transmission fluid capacities across the 2013-2018 model years, with a dry fill of 1.7 liters and a service fill of 1.4 liters.
- The dry fill figure of 1.7 liters represents the total fluid volume required when filling a completely empty or overhauled transmission, such as after a full unit replacement where no residual fluid remains in the system.
- The service fill of 1.4 liters applies to routine fluid changes on the Samsung QM3, where a portion of fluid is retained within the torque converter or transmission passages and only the drained volume needs replacement.
- The 0.3-liter difference between dry fill and service fill across both engine variants reflects the volume of fluid that remains trapped in the transmission assembly during a standard drain procedure.
- Both configurations are noted as transaxle, semi-automatic units, meaning the transmission and drive axle share a common housing, which is a factor in the relatively modest total fluid capacity of 1.7 liters.
- The specifications for both the 1.2-liter petrol and 1.5-liter diesel variants are listed under normal use conditions, indicating the stated capacities apply to standard operating environments rather than severe-duty cycles.