Rover Cabriolet, Tourer, Coupé

Automatic transmission fluid capacity & service interval

Rover Cabriolet, Tourer, and Coupé models utilize automatic transmission fluid with a capacity range of 2,2 to 2,4 liters. Service intervals consist of a check every 20000 km and a change every 40000 km or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cabriolet 1.6 (1992-2005)
  • Use: Normal
  • Capacity 2,2 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
  • Code: 4/1
Coupé 1.6 (1992-2005)
  • Use: Normal
  • Capacity 2,4 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
  • Code: 4/1
Tourer 1.6 (1992-2005)
  • Use: Normal
  • Capacity 2,4 liter
  • Check 20000 km
  • Change 40000 km/ 24 months
  • Code: 4/1

Additional Notes

  • The Rover Cabriolet 1.6 carries a transaxle automatic fluid capacity of 2.2 liters, which is lower than the 2.4 liters specified for both the Coupé 1.6 and Tourer 1.6 sharing the same transaxle, automatic configuration.
  • A transaxle combines the transmission and drive axle into a single unit, and the capacity figures listed here reflect the fluid volume required for a service fill of that combined assembly rather than a full overhaul quantity.
  • Across all three body styles, the fluid check interval is set at 20,000 km under normal use conditions, placing a routine inspection well ahead of the scheduled drain cycle.
  • The change interval for all three configurations is 40,000 km or 24 months under normal use, meaning whichever threshold is reached first would govern the service timing in calendar-sensitive operating situations.
  • The Coupé 1.6 and Tourer 1.6 share an identical 2.4-liter capacity and the same 20,000 km check and 40,000 km/24-month change intervals across the 1992-2005 model range, indicating no differentiation in fluid service requirements between those two body styles.
  • All three specifications apply exclusively to normal use conditions, meaning the listed intervals reflect standard operating environments rather than any elevated-stress or severe-duty classification.

Other Systems