Roewe 950

Automatic transmission fluid capacity & service interval

Roewe 950 automatic transmission fluid capacity ranges from 6,8 to 8,34 liters. Service intervals include checking every 7500 km or 6 months, and changing every 60000 km or 80000 km. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
950 1.8, CSA7182CDAN (2015- )
  • Use: Normal
  • Capacity 6,8 liter
  • Check 7500 km/ 6 months
  • Change 60000 km
  • Code: 6/1
950 2.0T, CSA7202CDAN (2015- )
  • Use: Normal
  • Capacity 6,8 liter
  • Check 7500 km/ 6 months
  • Change 60000 km
  • Code: 6/1
950 2.0, CSA7200ACV, CSA7200ACVS (2012-2014)
  • Use: Normal
  • Capacity 8,34 liter
  • Change 80000 km
  • Code: 6/1
950 2.4, CSA7240ACV, CSA7240ACVS (2012-2014)
  • Use: Normal
  • Capacity 8,34 liter
  • Change 80000 km
  • Code: 6/1
950 3.0, CSA7300ACV, CSA7300ACVS (2012-2014)
  • Use: Normal
  • Capacity 8,34 liter
  • Change 80000 km
  • Code: 6/1

Additional Notes

  • The Roewe 950 2.0, 2.4, and 3.0 engines produced from 2012-2014 all share an identical automatic transmission fluid capacity of 8.34 liters, indicating a common transmission unit across those three engine variants.
  • The 2012-2014 automatic transmission configurations carry a change interval of 80,000 km under normal use conditions, which is a relatively extended drain interval typical of sealed or lifetime-rated automatic units.
  • The 1.8 and 2.0T engines introduced from 2015 onward use a semi-automatic transaxle rather than a conventional automatic transmission, representing a fundamental drivetrain difference from the earlier 2012-2014 lineup.
  • The semi-automatic transaxles on the 1.8 and 2.0T variants hold 6.8 liters of fluid, which is notably lower than the 8.34-liter capacity of the 2012-2014 automatic transmissions, reflecting the different mechanical architecture of a transaxle design.
  • A fluid level check interval of every 7,500 km or 6 months under normal use conditions is specified for the 1.8 and 2.0T transaxles, a periodic inspection requirement that does not appear in the 2012-2014 automatic transmission specifications.
  • The 1.8 and 2.0T transaxles carry a change interval of 60,000 km under normal use conditions, which is 20,000 km shorter than the 80,000 km interval assigned to the 2012-2014 automatic transmissions.
  • The 2.0 and 2.4 engines from 2012-2014 are listed under separate model codes (CSA7200ACV, CSA7200ACVS and CSA7240ACV, CSA7240ACVS respectively), yet both share the same 8.34-liter capacity and 80,000 km change interval as the 3.0 variant.

Other Systems