Renault Mégane III Coupé-Cabriolet, E95 (EU)

Automatic transmission fluid capacity & service interval

Renault Mégane III Coupé-Cabriolet, E95 (EU) automatic transmission fluid capacity ranges from 1,4 to 1,7 liters. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Mégane III Coupé-Cabriolet 1.2 TCe 130 (2014-2016)
  • Use: Normal
  • Capacity 1,7 liter (Initial fill)
  • Capacity 1,4 liter (Service fill)
  • Code: DC4 6/1
Mégane III Coupé-Cabriolet 1.5 dCi 105, E95 (2010-2016)
  • Use: Normal
  • Capacity 1,7 liter
  • Code: DC4 6/1
Mégane III Coupé-Cabriolet 1.5 dCi 110 DPF, E95 (2010-2016)
  • Use: Normal
  • Capacity 1,7 liter
  • Code: DC4 6/1
Mégane III Coupé-Cabriolet 1.5 dCi 85, E95 (2010-2016)
  • Use: Normal
  • Capacity 1,7 liter
  • Code: DC4 6/1
Mégane III Coupé-Cabriolet 1.5 dCi 90 DPF, E95 (2010-2016)
  • Use: Normal
  • Capacity 1,7 liter
  • Code: DC4 6/1

Additional Notes

  • The Renault Mégane III Coupé-Cabriolet E95 automatic transmission fluid specifications cover semi-automatic transaxle units across both petrol and diesel engine variants from 2010-2016.
  • All five configurations listed use a semi-automatic transaxle arrangement, meaning the gearbox and final drive share a common housing and fluid supply rather than being serviced as separate units.
  • The 1.5 dCi variants — spanning 85, 90 DPF, 105, and 110 DPF power outputs across 2010-2016 — each carry a uniform 1.7-liter capacity with no distinction between initial fill and service fill volumes in the specifications.
  • The 1.2 TCe 130 (2014-2016) is the only configuration where the specifications separate initial fill from service fill, recording 1.7 liters for initial fill and 1.4 liters for service fill.
  • The 0.3-liter difference between the 1.2 TCe 130 initial fill of 1.7 liters and service fill of 1.4 liters reflects the residual fluid that remains in the transaxle during a drain-and-refill service, as a full drain never recovers the entire fluid volume held in passages and cavities.
  • All specifications are listed under normal use conditions, meaning the stated capacities and any associated intervals apply to standard operating environments rather than elevated-stress or severe-duty cycles.

Other Systems