Renault Mégane, C64 / B64 / L64 (EU)

Automatic transmission fluid capacity & service interval

Renault Mégane, C64 / B64 / L64 (EU) models require automatic transmission fluid with a capacity range of 3,5 to 4 liters. Service intervals include checks at 15000 km/12 months, 20000 km/12 months, and 30000 km/24 months, with fluid changes at 60000 km/36 months and 60000 km/48 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Mégane 1.6 16V, C64 / B64 / L64 (2001-2002)
  • Use: Normal
  • Capacity 3,5 liter
  • Check 24 months/ 30000 km
  • Code: DP0 4/1
Mégane 1.6 16V, C64 / B64 / L64 (1999-2000)
  • Use: Normal
  • Capacity 3,5 liter
  • Check 20000 km/ 12 months
  • Code: DP0 4/1
Mégane 1.6 (66 kW), C64 / B64 / L64 (1998-1999)
  • Use: Normal
  • Capacity 4 liter
  • Check 20000 km/ 12 months
  • Change 60000 km/ 36 months
  • Code: AD4 4/1
Mégane 2.0, C64 / B64 / L64 (1998-2000)
  • Use: Normal
  • Capacity 4 liter
  • Check 20000 km/ 12 months
  • Change 60000 km/ 36 months
  • Code: AD4 4/1
Mégane 2.0, C64 / B64 / L64 (1998-2000)
  • Use: Normal
  • Capacity 3,5 liter
  • Check 20000 km/ 12 months
  • Change 60000 km/ 48 months
  • Code: DP0 4/1
Mégane 1.6 (66 kW), C64 / B64 / L64 (1995-1998)
  • Use: Normal
  • Capacity 4 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 36 months
  • Code: AD4 4/1
Mégane 2.0, C64 / B64 / L64 (1995-1998)
  • Use: Normal
  • Capacity 4 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 36 months
  • Code: AD4 4/1
Mégane 2.0, C64 / B64 / L64 (1995-1998)
  • Use: Normal
  • Capacity 3,5 liter
  • Check 15000 km/ 12 months
  • Change 60000 km/ 48 months
  • Code: DP0 4/1

Additional Notes

  • All rows cover automatic transaxle units, meaning the transmission and final drive share a common fluid sump rather than using separate housings.
  • Two distinct capacity values appear across the Renault Mégane C64 / B64 / L64 automatic transaxle specifications: 4 liters and 3.5 liters. A 4-liter figure typically reflects a full drain-and-refill or overhaul quantity, while a 3.5-liter figure more commonly represents a service fill after partial drainage.
  • The 1.6 (66 kW) variant from 1995-1998 carries a 4-liter capacity paired with a check interval of 15,000 km or 12 months, while the same engine in the 1998-1999 period retains the 4-liter capacity but moves to a longer check interval of 20,000 km or 12 months.
  • The 1.6 16V variant introduced for 1999-2000 uses a reduced 3.5-liter capacity and a 20,000 km or 12-month check interval, with no fluid change interval listed in the specifications.
  • For the 1.6 16V in 2001-2002, the check interval extends further to 30,000 km or 24 months, while the 3.5-liter capacity remains unchanged from the prior 1999-2000 specification.
  • The 2.0 engine from 1995-1998 has two separate transaxle entries running concurrently: one at 4 liters with a 60,000 km or 36-month change interval, and another at 3.5 liters with a longer 60,000 km or 48-month change interval. Both share the same 15,000 km or 12-month check interval.
  • The same dual-entry pattern repeats for the 2.0 engine in 1998-2000, again listing both a 4-liter variant with a 36-month change interval and a 3.5-liter variant with a 48-month change interval, both on a 20,000 km or 12-month check schedule.
  • Across the 2.0 specifications, the 48-month change interval associated with the 3.5-liter entries is notably longer than the 36-month interval tied to the 4-liter entries, suggesting the two entries correspond to different transmission units with differing fluid degradation tolerances.
  • All specifications across the full 1995-2002 range are designated for normal use conditions, meaning none of the listed intervals account for severe-duty operating environments such as frequent towing, extreme temperatures, or predominantly short-trip driving.

Other Systems