Renault Grand Scénic III, J95 (EU)
Automatic transmission fluid capacity & service interval
Renault Grand Scénic III, J95 (EU) automatic transmission fluid capacity ranges from 1,7 to 7,6 liters. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Grand Scénic III 1.5 dCi 110 (2009-2016) |
|
| Grand Scénic III 1.5 dCi 110 DPF (2009-2016) |
|
| Grand Scénic III 2.0 dCi 150 DPF (2009-2016) |
|
Additional Notes
- The Renault Grand Scénic III J95 1.5 dCi 110 and 1.5 dCi 110 DPF share an identical transaxle fluid capacity of 1.7 liters under normal use conditions, reflecting the semi-automatic nature of both units.
- A semi-automatic transaxle, as fitted to both 1.5 dCi 110 variants, combines elements of manual and automatic operation, which typically results in a smaller fluid volume requirement compared to a conventional fully automatic unit.
- The 2.0 dCi 150 DPF carries a dry fill capacity of 7.6 liters, a figure that applies when the transmission is completely drained and the torque converter is empty, such as during a full overhaul or unit replacement.
- For routine maintenance on the 2.0 dCi 150 DPF under normal use conditions, the service fill capacity is 3.5 liters, representing the volume needed when residual fluid remains in the torque converter and passages after a standard drain.
- The difference between the 7.6-liter dry fill and the 3.5-liter service fill on the 2.0 dCi 150 DPF indicates that approximately 4.1 liters of fluid is retained within the transmission assembly during a typical service drain.
- The 2.0 dCi 150 DPF uses a conventional automatic transaxle rather than the semi-automatic unit found in the 1.5 dCi 110 variants, and the substantially higher fluid capacity of 7.6 liters dry reflects the greater internal volume of a full hydraulic automatic transmission.