Proton Saga, II

Coolant capacity & service interval

Proton Saga, II uses coolant with a capacity of 5 liters. Service intervals include checking at 9000 miles or 12 months and changing at 27000 miles or 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Saga 1.3 (2008-2016)
  • Use: Normal
  • Capacity 5 liter
  • Check 9000 miles/ 12 months
  • Change 27000 miles/ 36 months
Saga 1.6 (2008-2016)
  • Use: Normal
  • Capacity 5 liter
  • Check 9000 miles/ 12 months
  • Change 27000 miles/ 36 months

Additional Notes

  • Both the 1.3 and 1.6 engine variants of the Proton Saga II share an identical cooling system capacity of 5 liters, indicating no meaningful difference in coolant volume requirements between the two engine displacements across the 2008-2016 model years.
  • A 5-liter cooling system capacity is a moderate figure for a compact sedan, consistent with a fully filled system including the radiator, engine block passages, heater core circuit, and reservoir, rather than a partial or drain-and-refill service quantity.
  • The check interval is set at 9,000 miles or 12 months, whichever comes first, under normal use conditions, meaning coolant concentration, level, and condition are to be inspected on a relatively frequent basis relative to the change interval.
  • The coolant change interval is specified at 27,000 miles or 36 months under normal use conditions, placing a full flush and refill on a three-year or roughly 27,000-mile cycle for both engine variants.
  • The ratio between the check interval and the change interval is exactly 3:1, meaning three inspection cycles occur for every one full coolant replacement cycle across both the 1.3 and 1.6 configurations.

Other Systems