Proton Inspira

Clutch fluid capacity & service interval

Proton Inspira clutch fluid capacity ranges between min and max. Service intervals include checking every 20000 km or 12 months and changing every 40000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Inspira 1.8, P3-90A (2011-2019)
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months
Inspira 2.0, P3-90A (2011-2019)
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months

Additional Notes

  • Both the 1.8 and 2.0 engine variants of the Proton Inspira use a hydraulic clutch system, which means clutch fluid serves as the medium for transmitting pedal force to the clutch mechanism rather than a mechanical cable arrangement.
  • The clutch fluid level specification for both variants is expressed as a range rather than a fixed volume, with the acceptable fill sitting between the minimum and maximum marks on the reservoir.
  • A check interval of every 20,000 km or 12 months, whichever comes first, applies to both the 1.8 and 2.0 configurations under normal use conditions.
  • The change interval for clutch fluid across both engine variants is set at 40,000 km or 24 months under normal use conditions, placing the replacement cycle at exactly double the inspection interval.
  • The alignment of check and change intervals across the 1.8 and 2.0 variants reflects identical hydraulic clutch service schedules for the P3-90A transmission pairing used in both configurations from 2011-2019.

Other Systems