Porsche Taycan, Y1A (USA)

Automatic transmission fluid capacity & service interval

Porsche Taycan, Y1A (USA) models utilize automatic transmission fluid with a capacity range of 0,7 to 2,55 liters. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Taycan Launch Control (2020- )
  • 2-speed, rear
  • Use: Normal
  • Capacity 2,55 liter
  • Code: 0ME 1/1
  • Taycan Launch Control Plus (2020- )
  • 2-speed, rear
  • Use: Normal
  • Capacity 2,55 liter
  • Code: 0ME 1/1
  • Taycan 4S Launch Control (2019- )
  • 2-speed, rear
  • Use: Normal
  • Capacity 2,55 liter
  • Code: 0ME 1/1
  • Taycan 4S Launch Control (2019- )
  • Single-speed, front
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Code: 0MG 1/1
  • Taycan Turbo Launch Control (2019- )
  • 2-speed, rear
  • Use: Normal
  • Capacity 2,55 liter
  • Code: 0ME 1/1
  • Taycan Turbo Launch Control (2019- )
  • Single-speed, front
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Code: 0MG 1/1

Additional Notes

  • The Porsche Taycan, Y1A (USA) rear 2-speed transmission carries a fluid capacity of 2.55 liters across the Taycan 4S Launch Control, Taycan Launch Control, Taycan Launch Control Plus, and Taycan Turbo Launch Control configurations, all under normal use conditions.
  • The front single-speed transmission found on the Taycan 4S Launch Control and Taycan Turbo Launch Control has a capacity range of 0.7-0.8 liters under normal use conditions, which is notably lower than the rear 2-speed unit and reflects the simpler, single-ratio design of a front drive unit in an all-wheel-drive electric platform.
  • The 2.55-liter rear transmission capacity is a service fill figure, meaning the volume required during a standard fluid service rather than a full overhaul, which would typically demand a higher quantity to account for residual fluid in passages and components.
  • The 0.7-0.8 liter range on the front single-speed transmission suggests a tolerance window during the fill procedure, where the acceptable final level falls within that span rather than at a single fixed point.
  • All six specification rows carry a normal use condition designation, meaning the listed capacities apply to standard operating environments rather than severe-duty cycles such as track use or extreme temperature exposure.
  • The Taycan 4S Launch Control and Taycan Turbo Launch Control are the only configurations in the listed specifications that include both a rear 2-speed and a front single-speed transmission, each with its own distinct fluid capacity figure, reflecting the dual-motor all-wheel-drive architecture of those variants.