Peugeot Partner Tepee, B9
Automatic transmission fluid capacity & service interval
Peugeot Partner Tepee, B9 automatic transmission fluid capacity ranges from 2,1 to 2,2 liters. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Partner Tepee 1.6 HDi 92, 9HP (2012-2015) |
|
Additional Notes
- The Peugeot Partner Tepee B9 1.6 HDi 92 with the 9HP transmission carries a dry fill capacity of 2.2 liters, which represents the total fluid volume required when filling a completely drained or newly assembled unit.
- A service fill capacity of 2.1 liters applies to the 1.6 HDi 92 9HP configuration, reflecting the slightly lower volume needed during a routine fluid change where residual fluid remains in the torque converter or passages.
- The 0.1-liter difference between the dry fill and service fill figures on the 1.6 HDi 92 9HP is relatively narrow, indicating minimal fluid retention within the transmission assembly during a standard drain procedure.
- The 9HP unit in the 1.6 HDi 92 is classified as a semi-automatic transaxle, meaning the transmission and final drive share a common housing and fluid supply, which is reflected in the single unified capacity figure covering both functions.
- The listed specifications apply under normal use conditions for the 2012-2015 model years of the 1.6 HDi 92 9HP variant, with no separate severe-duty interval or capacity figure present in the data for this configuration.